STONKAM CO., LTD
Products  > Wireless >  Wireless Forklift Camera
Wireless Forklift Camera
(Model:DW-687)
Wireless Forklift Camera
Features
  • Wireless image transmission distance: 100M
  • Waterproof: IP69K approved
  • Night vision distance: 1~3 m
  • With magnet housing, free installation


Wireless Forklift Camera

Specification
Image Device CMOS
TV System PAL/NTSC
Effective Pixels 756×504 pixels
Sensing Area 4.80mm×3.73mm
Scanning System 2:1 Interlace                                                                       
Sync. System Internal
Horizontal Sync Frequency                   15.625 kHz/15.734 kHz
Vertical Sync Frequency 50Hz/60Hz
Video Output 1.0Vp-p, 75Ohm
Gamma Consumption 0.45
AGC Auto
S/N Ratio Better than 46.5dB
White Balance Auto
Electronic Shutter Auto:1/60(NTSC)/1/50(PAL)~1/100,000 Seconds
BLC Auto
Operation Frequency 2400-2483.5MHZ
Line of Sight Range 100M
Receiving Sensitivity -89dBm
Video Code MPEG4
Frame Rate PAL:25f/s NTSC:30f/s
Spread Spectrum FHSS
Delay 120ms
RF Bit Rate 4Mbps
Operating Temperature –20℃ ~ 70℃, RH95%MAX
Storage Temperature –30℃ ~ 80℃, RH95%MAX
Minimum Illumination 0.1Lux
Power Supply DC10~32V
Lens f=6.0mm
Viewing Angle 45°




Why to install a forklift camera system?

How to avoid accidents in warehousing operations caused by lmit visibility?

How to improve the working efficiency of the forklifts with safety being guaranteed?

How to prevent secondary damage by the collapsed goods or shelves resulted from the vision error of forklifts?

......




Wireless Forklift Camera



STONKAM forklift camera system can help you solve your problems!


Wireless Forklift Camera



  1  


Installation instructions to STONKAM forklift camera system

Mount the forklift camera onto the fork arm and the monitor onto the cab, which offers the operators with better vision


Wireless Forklift Camera

Wireless Forklift Camera



  2  


2.4GHz digital wireless transmission makes it convenient, 

stable and wiring-free. 

Turn on the power to use. With recoding function


Forklift Camera System



  3  


Magnetic Housing, non-destructive Installation

Place the magnetic base forklift camera on the iron arm


Wireless Forklift Camera



  4  


Save complex installation procedures, cutting installation costs

The wireless forklift camera can be powered by an external battery,  with no need for additional power wiring


Wireless Forklift Camera


Product Video

Leave your message and contact details, we will try to get back to you!

Model No.

Introduce yourself *

Message *

Copyright ©2002-2016 STONKAM CO.,LTD.ALL Rights Reserved. 广东省通信管理局 粤ICP备05043268号